German Tegometall wall bays
Economic version of Tegometall wall bays
Due to the deterioration of the economic environment, some customers begin to require the use of low-configuration components, such as 0.7mm shelf panels, 2.5mm brackets, 0.6mm caps, and so on.
Load-bearing Test of wall shelving
Load-bearing of each layer: according to the load bearing test, the ordinary 2H bracket can bear the weight of each layer of 200kg for one month. The 3H bracket is loaded approximately at each layer of the 250kg. To know more, please read our article “RedSheep shop shelving quality control system and packing solution“.
Shelf panel under load bearing test
The most common colors of German shelving are RAL9001, RAL7035, RAL7015, RAL9006, and so on.
Most common colors of commercial wall bays
Installation of wall bays
The order of installation is upright – base leg – back panel – plinth – bottom shelf panel – bracket – top shelf panel – other parts. The key point is that the base leg installation should not be too loose or too tight, too loose will cause the whole shelf to shake, too tight will not be stuck into the upright. Please go to Youtube to search for related installation videos.
Base leg and back panel solutions for different shop wall shelving height
The ground height of German and Anchen is 150, but the adjustment screw on the base leg is about 40mm, plus the extra 10mm of the upright, so the ground height deducted when calculating the back panel should be 100.
Shop shelving in supermarket